3. Sensors

A sensor represents a physical or virtual sensor or actuator. It contains a data stream made up of fields.

A sensor has the following attributes:

Name	Value Description
id	the numeric id of the sensor. This may be used in the API in place of the sensor name.
name **	the name of the sensor. Note that the global name is {username}.{sensorname}. When logged in as a the owner, you can refer to the sensor using only {sensorname}. To access a public sensor created by another user, you can refer to it by its numeric id or the global name, {username}.{sensorname}.
description **	a description of the sensor for text searches.
longName **	longer display name of the sensor.
url	deprecated
latitude	the latitude location of the sensor in degrees. This is a static location used for locating sensors on a map and for location-based queries. (Dynamic location (e.g. for mobile sensors) is in the lat and lng fields of sensor data.)
longitude	the longitude location of the sensor in degrees. This is a static location used for locating sensors on a map and for location-based queries. (Dynamic location (e.g. for mobile sensors) is in the lat and lng fields of sensor data.)
lastUpdate	last update time in milliseconds. This is the last time sensor data was recorded, or an actuator script polled for control messages.
visibility	PUBLIC: The sensor is publicly visible ORGANIZATION: The sensor is visible to everyone in the same organization as the sensor PRIVATE: The sensor is only visible to the owner. In any case posting data to the sensor is restricted to the sensor’s owner.
owner	the owner of the sensor
fields	the expected data fields, their type (number or string), units and if available, last update time and value.
tags	the list of tags for the sensor
data	sensor data (not shown yet)

** Required when creating a new sensor.

3.1. Querying Sensors

A list of matching sensors may also be queried by the system.

The current query parameters are as follows:

Name	Value Description
scope	all - all sensors the current user has access to subscribed - the sensors the user has subscribed to | contributed - the sensors the user has contributed to the system.
tags	list of comma separated tags
orgs	list of comma separated organization names
private	**true** - private sensors only; **false** - public only deprecated, use visibility instead
visibility	filter by the visibility of the sensors, either of public, organization, or private
text	text to search for in the name, long name and description
active	when true, only returns sensors that have been updated in the last 15 minutes.
offset	offset into list of sensors for paging
limit	limit to show for paging. The maximum number of sensors to display is 1000.
location	geo coordinates for a bounding box to search within. Format is yy.yyy,xx.xxx:yy.yyy,xx.xxx, and the order of the coordinates are North,West:South,East. Example: location=56.89,-114.55:17.43,-106.219

To query for sensors, add query parameters after the sensors URL as follows:

URL	http://wotkit.sensetecnic.com/api/sensors?{query}
Privacy	Public or Private
Format	json
Method	GET
Returns	On error, an appropriate HTTP status code; On success, OK 204 and a list of sensor descriptions matching the query.

example

curl --user {id}:{password}
"http://wotkit.sensetecnic.com/api/sensors/sensetecnic.mule1?tags=canada"

Output:

[
  {
        "tags":["data","vancouver","canada"],
                "latitude":0.0,
                "longitude":0.0,
                "longName":"api-data-test-1",
                "lastUpdate":"2013-01-26T01:55:36.514Z",
                "name":"api-data-test-1",
                "fields":
                        [{"required":true, "longName":"latitude",
                          "lastUpdate":"2013-01-26T01:55:36.514Z",
                          "name":"lat", "value":39.0, "type":"NUMBER","index":0},
                        {"required":true,"longName":"longitude",
                         "lastUpdate":"2013-01-26T01:55:36.514Z",
                         "name":"lng","value":85.0,"type":"NUMBER","index":1},
                        {"required":true,"longName":"Data",
                         "lastUpdate":"2013-01-26T01:55:36.514Z
                         "name":"value","value":20.0,"type":"NUMBER","index":2},
                        {"required":false,"longName":"Message",
                         "lastUpdate":"2013-01-26T01:55:36.514Z",
                         "name":"message","value":"test message to be active 164",
                         "type":"STRING","index":3}],
        "id":69,
        "visibility":"PUBLIC",
        "owner":"roseyr",
        "description":"api-data-test-1"
  },

  {
        "tags":["data","canada","edmonton"],
        "latitude":0.0,
        "longitude":0.0,
        "longName":"api-data-test-2",
        "lastUpdate":"2013-01-26T01:55:42.400Z",
        "name":"api-data-test-2",
        "fields":
                [{"required":true,"longName":"latitude",
                  "lastUpdate":"2013-01-26T01:55:37.537Z",
                  "name":"lat","value":65.0,"type":"NUMBER","index":0},
                {"required":true,"longName":"longitude",
                 "lastUpdate":"2013-01-26T01:55:37.537Z",
                 "name":"lng","value":74.0,"type":"NUMBER","index":1},
                {"required":true,"longName":"Data",
                 "lastUpdate":"2013-01-26T01:55:37.537Z",
                 "name":"value","value":82.0,"type":"NUMBER","index":2},
                {"required":false,"longName":"Message",
                 "lastUpdate":"2013-01-26T01:55:37.537Z",
                 "name":"message","value":"test message to be active 110",
                 "type":"STRING","index":3}],
        "id":70,
        "visibility":"PUBLIC",
        "owner":"roseyr",
        "description":"api-data-test-1"
  },

  {
        "tags":["data","canada","winnipeg"],
        "latitude":0.0,
        "longitude":0.0,
        "longName":"api-data-test-3",
        "lastUpdate":"2013-01-26T01:55:34.488Z",
        "name":"api-data-test-3",
        "fields":
                [{"required":true,"longName":"latitude","name":"lat","value":0.0,
                  "type":"NUMBER","index":0},
                {"required":true,"longName":"longitude","name":"lng","value":0.0,
                 "type":"NUMBER","index":1},
                {"required":true,"longName":"Data","name":"value","value":0.0,
                 "type":"NUMBER","index":2},
                {"required":false,"longName":"Message","name":"message",
                 "type":"STRING","index":3}],
        "id":71,
        "visibility":"PUBLIC",
        "owner":"roseyr",
        "description":"api-data-test-3"
  }
]

3.2. Viewing a Single Sensor

To view a single sensor, query the sensor by sensor name or id as follows:

URL	http://wotkit.sensetecnic.com/api/sensors/{sensorname}
Privacy	Public or Private
Format	json
Method	GET
Returns	Appropriate HTTP status code; OK 200 - if successful

example

curl --user {id}:{password}
"http://wotkit.sensetecnic.com/api/sensors/sensetecnic.mule1"

Output:

{
        "name":"mule1",
        "fields":[
                {"name":"lat","value":49.20532,"type":"NUMBER","index":0,
                 "required":true,"longName":"latitude",
                 "lastUpdate":"2012-12-07T01:47:18.639Z"},
                {"name":"lng","value":-123.1404,"type":"NUMBER","index":1,
                 "required":true,"longName":"longitude",
                 "lastUpdate":"2012-12-07T01:47:18.639Z"},
                {"name":"value","value":58.0,"type":"NUMBER","index":2,
                 "required":true,"longName":"Data",
                 "lastUpdate":"2012-12-07T01:47:18.639Z"},
                {"name":"message","type":"STRING","index":3,
                 "required":false,"longName":"Message"}
        ],
        "id":1,
        "visibility":"PUBLIC",
        "owner":"sensetecnic",
        "description":"A big yellow taxi that travels
                       from Vincent's house to UBC and then back.",
        "longName":"Big Yellow Taxi",
        "latitude":51.060386316691,
        "longitude":-114.087524414062,
        "lastUpdate":"2012-12-07T01:47:18.639Z"}
}

3.3. Creating/Registering a Sensor

To register a sensor, you POST a sensor resource to the url /sensors.

• The sensor resources is a JSON object.
• The “name”, “longName”, and “description” fields are required when creating a sensor.
• The “latitude” and “longitude” fields are optional and will default to 0 if not provided.
• The “visibility” field is optional and will default to “PUBLIC” if not provided.
• The “tags”, “fields” and “organization” information are optional.
• If “visibility” is set to ORGANIZATION, a valid “organization” must be supplied.
• The sensor name must be at least 4 characters long, contain only lowercase letters, numbers, dashes and underscores, and can start with a lowercase letter or an underscore only.

To create a sensor:

URL	http://wotkit.sensetecnic.com/api/sensors
Privacy	Private
Format	json
Method	POST
Returns	HTTP status code; Created 201 if successful; Bad Request 400 if sensor is invalid; Conflict 409 if sensor with the same name already exists

example

curl --user {id}:{password} --request POST --header "Content-Type: application/json"
--data-binary @test-sensor.txt 'http://wotkit.sensetecnic.com/api/sensors'

For this example, the file test-sensor.txt contains the following. This is the minimal information needed to register a sensor resource.

{
        "visibility":"PUBLIC",
        "name":"taxi-cab",
        "description":"A big yellow taxi.",
        "longName":"Big Yellow Taxi",
        "latitude":51.060386316691,
        "longitude":-114.087524414062
}

3.4. Creating/Registering multiple Sensors

To register multiple sensors, you PUT a list of sensor resources to the url /sensors.

• The sensor resources is a JSON list of objects as described in Creating/Registering a Sensor.
• Limited to 100 new sensors per call. (subject to change)

URL	http://wotkit.sensetecnic.com/api/sensors
Privacy	Private
Format	json
Method	PUT
Returns	HTTP status code; Created 201 if successful; Bad Request 400 if sensor is invalid; Conflict 409 if sensor with the same name already exists ; On Created 201 or some errors (not all) you will receive a JSON dictionary where the keys are the sensor names and the values are true/false depending on whether creating the sensor succeeded. For Created 201 all values will be true.

3.5. Updating a Sensor

Updating a sensor is the same as registering a new sensor other than PUT is used and the sensor name or id is included in the URL.

Note that all top level fields supplied will be updated.

• You may update any fields except “id”, “name” and “owner”.
• Only fields that are present in the JSON object will be updated.
• If “visibility” is set to ORGANIZATION, a valid “organization” must be supplied.
• If “tags” list or “fields” list are included, they will replace the existing lists.
• If “visibility” is hardened (that is, the access to the sensor becomes more restrictive) then all currently subscribed users are automatically unsubscribed, regardless of whether they can access the sensor after the change.

To update a sensor owned by the current user:

URL	http://wotkit.sensetecnic.com/api/sensors/{sensorname}
Privacy	Private
Format	json
Method	PUT
Returns	HTTP status code; No Content 204 if successful

For instance, to update a sensor description and add tags:

example

curl --user {id}:{password} --request PUT --header "Content-Type: application/json"
--data-binary @update-sensor.txt 'http://wotkit.sensetecnic.com/api/sensors/taxi-cab'

The file update-sensor.txt would contain the following:

{
        "visibility":"PUBLIC",
        "name":"taxi-cab",
        "description":"A big yellow taxi. Updated description",
        "longName":"Big Yellow Taxi",
        "latitude":51.060386316691,
        "longitude":-114.087524414062,
        "tags": ["big", "yellow", "taxi"]
}

3.6. Deleting a Sensor

Deleting a sensor is done by deleting the sensor resource.

To delete a sensor owned by the current user:

URL	http://wotkit.sensetecnic.com/api/sensors/{sensorname}
Privacy	Private
Format	not applicable
Method	DELETE
Returns	HTTP status code; No Response 204 if successful

example

curl --user {id}:{password} --request DELETE
'http://wotkit.sensetecnic.com/api/sensors/test-sensor'